SY4000

Synchronization Module and Pulse Delay Generator
Download
datasheet
  • OEM (single board) and encased options
  • 8 independent output channels
  • Ultra-stable internal clock 0.2 ppm (optional)
  • 25 ps timing resolution
  • OEM (single board) and encased options
  • 8 independent output channels
  • Ultra-stable internal clock 0.2 ppm (optional)
  • 25 ps timing resolution

Features

Features

  • Compact design
  • OEM (single board) and encased options
  • 8 independent output channels
  • Ultra-stable internal clock 0.2 ppm (optional)
  • Precise delay control in range 2 ns to 150 ms
  • 25 ps timing resolution
  • Hi-accuracy synchronization to external pulse train
  • DAC output
  • Both 50 Ω and differential outputs present
  • Measurement of
    – Optical clock frequency
    – Triggering frequency
    – Delay
  • Frequency divider
  • Frequency divider for photodetectors

Description

Pulse synchronization module with delay generator is designed to create up to 8 delayed output pulse sequences precisely synchronized to internal or external clock. Photo detector or electrical signal can be used as input source to be synchronized with. Generator gives possibility to create different sequences like delayed triggering, or any delayed precisely timed series. Particularly, Ekspla recommend using SY4000 to create sets of pulses to control PCD-UHR series pockels cell drivers with one, two or 4 triggering inputs.

Encased Version

Preserves all specifications as SY4000 in additionally communication ports RS232, USB, LAN, WLAN are added. Powering from mains 90 … 264 V,
50 – 60 Hz or 12 V DC. Power consumption less than 15 W. Ideal solution for your lab and/or evaluation before switching to OEM version.

Specifications

ModelSY4000
PULSE GENERATION
Channel modesSingle shot, burst, normal, duty cycle, frequency divider
Delay range0 to 150 ms
Negative delay-150 ms
Pulsewidth2 ns to 150 ms
Resolution25 ps
Accuracy25 ps + 0.000001 × delay
Time base 100 MHz, 0.2 ppm
Jitter< 30 ps
Burst mode1 to 65535
EXTERNAL TRIGGER
RateDC to 20 MHz
Thershold1.3 V
Input levelLVTTL, TTL
Sloperising
Jitter< 100 ps RMS
Delay< 13 ns; < 70 ns
INTERNAL GENERATOR
ModeDuty cycle
Rate50 ns to 100 sec
Resolution10 ns; 300 ps
Accuracy5 ns + 0.000001 × period
Jitter100 ps RMS
Burst0 … 65535
OUTPUTS
Output level2.5 V, 4 V
Impedance50 Ω
Slew rate1.5 V/ns
COMMUNICATIONS
CommunicationsCAN
OPERATING REQUIREMENTS
Power requirements12 V DC, 500 mA
Dimensions (not including connectors)
OEM board (W × D × H)100 × 77 × 20 mm
Encased version (W × D × H)105 × 86 × 85 mm

Drawings

Send request about SY4000