PS1223CO

Laser Cooling Unit
Download
datasheet

/ Cooling capacity 0-5 kW (at temperature difference 10 °C)

/ PID controller based temperature regulation in range 15-35 °C, better than 0.1 °C stability

/ Controlled deionizer maintains constant coolant conductivity (preset in range 1..100 uS/cm)

/ Cooling capacity 0-5 kW (at temperature difference 10 °C)

/ PID controller based temperature regulation in range 15-35 °C, better than 0.1 °C stability

/ Controlled deionizer maintains constant coolant conductivity (preset in range 1..100 uS/cm)

Description

Features

  • Water-to-water cooling unit in 19” rack mount stainless steel case
  • Cooling capacity 0-5 kW (at temperature difference 10 °C)
  • PID controller based temperature regulation in range 15-35 °C, better than 0.1 °C stability
  • Smooth supply water flow regulation by proportional valve
  • Controlled deionizer maintains constant coolant conductivity (preset in range 1..100 uS/cm)
  • Easy replaceable particle filter, accessed from front panel
  • Coolant pressure can be reduced using Bypass valve
  • Graphic display
  • Overheat, overpressure, low flow, low coolant level warnings and error stop, error indication by LED, beeper, display, interlock connector, remote control interfaces
  • Optional heater with programmable power in range 0..1 kW speeds up temperature settling at startup
  • Optional USB, Ethernet interface for installation adjustment and remote control
  • Optional RS232, RS485, CAN interfaces

 

Cooling unit PS1223CO is second generation of water-to-water cooling units designed for flashlamp-pumped lasers. Microcontroller operated PS1223CO has better performance than PS1222CO while maintaining full backward compatibility.

PID controller smoothly regulates water flow thru heat exchanger maintaining high stability of output temperature in a wide range of removed heat (Fig. 1). 4 digital thermometers measure temperature of coolant at output, return, tank and water supply. Coolant flow, pressure, tank water level and conductivity are also measured. Using this data microcontroller stabilizes output temperature, estimates removed heat, generates early warnings and errors. All data can be accessed by any of interface: USB, Ethernet or optional RS232, RS485, CAN. Test and adjustment utility program for Windows is included (for use with USB interface).

Coolant flow and output pressure can be adjusted manually using bypass valve, located inside unit and accessible when front panel is open (Fig. 2).

Maximum heat removal capability of the PS1223CO depends on temperature difference between coolant output temperature and supply water temperature (Fig. 3).

 

Specifications

ModelPS1223CO
Cooling capacity at ΔT=10 °C*:4 kW
Output temperature regulation±0.1 °C, (typ. ±0.05 °C)
Stabilization temperature range15-35 °C
Coolant flow range1-6 l/min
Maximum output pressure with bypass valve closed, zero flow3.0 Bar
Coolantdeionized or distilled water
Coolant reservoir capacity3.5 l
Maintained coolant conductivity1...100 µS/cm
Required water supply pressure1-8 bar
Required water drain pressure<0.3 bar
Mainssingle phase 180-250 V, 50/60Hz
Power consumption (without heater)< 200W
Size19" 4U, depth 500 mm max.
Weight< 20 kg

* Cooling capacity is limited by supply water consumption.

Send request about PS1223CO