Atlantic HR series

High Repetition Rate Industrial Picosecond Laser
  • Industrial grade high pulse repetition rate picosecond laser
  • Up to 16 W
  • 88 MHz pulse repetition rate
  • 8 ps pulses
  • Industrial grade high pulse repetition rate picosecond laser
  • Up to 16 W
  • 88 MHz pulse repetition rate
  • 8 ps pulses

Features & Applications


  • Up to 16 W output power
  • High 88 MHz repetition rate
  • < 8 ps pulse duration
  • High stability and excellent beam quality M²<1.3
  • 1064 nm532 nm or 355 nm output wavelengths
  • Compact, sealed and rugged design
  • Low maintenance costs
  • Single-phase powering
  • No external cooling water


  • Paterning
  • Structuring
  • Ablation
  • Micromachining
  • Inspection
  • Amplifier seeding
  • OPO pumping


The Atlantic HR diode pumped picosecond laser introduces a high repetition rate solution for material processing and other industrial applications.
Diode pumped solid state laser technology combined with EKSPLA‘s 20 years of experience in picosecond lasers has enabled the design and manufacture of a reliable cost effective tool.

A rugged design ensures stable and reliable operation in diverse ambient conditions. Short pulse duration (< 8 ps) and good beam quality (M2 < 1.3) make this laser an excellent choice for many industrial as well as R&D applications. A high repetition rate allows for fast processes with multiple meters per second scanning speed.


ModelAtlantic HR-1064Atlantic HR-532Atlantic HR-355
Main specifications 1)
Wavelength 2)1064 nm532 nm355 nm
Output power16 W8 W> 2 W
Repetition rate88±2 MHz
Pulse length< 8 ps< 7 ps< 7 ps
Spatial modeTEM00
M2< 1.3< 1.5
Beam diameter1.8 mm1.5 mm~ 3 mm
Beam divergence< 0.8 mRad< 0.8 mRad< 1.5 mRad
Beam elipticity> 0.8> 0.8> 0.7
Beam pointing stability better than50 µRad
Long term power stability after warm up (Std. dev.) 3)2 %2 %3 %
Amplitude noise< 1 %< 2 %< 2 %
Maximum warm-up time1 h
Static alignment tolerances relative to laser mount
Beam position± 1 mm
Beam angle± 2.5 mRad
Operating requirements
Operation ambient temperature20 – 25 °C
Operating voltage110/115/208/230V AC selectable, single phase 50 or 60 Hz
Physical characteristics
Laser head dimensions (W×H×L)164 × 170 × 664 mm214 × 161 × 681 mm
Power supply dimensions (W×H×L)561 × 841 × 861 mm
Laser head weight25 kg30 kg
Power supply weight90 kg
Umbilical length3 m
Classification according EN60825-1CLASS 4 laser product
  1. Due to continuous improvement, all specifications are subject to change without notice. Parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture. Unless stated otherwise, all specifications are measured at 1064 nm.
  2. 266 nm version is available on request.
  3. For 2 hours at constant temperature.


Send request about Atlantic HR